ITL15-2
Forced-air-cooled industrial triode
The Marshall Components ITL15-2 is a ceramic-metal triode with a coaxial design, developed for industrial radio-frequency applications.
Designed for continuous-wave operation. For pulsed operation, contact us to discuss the operating conditions and requirements of your equipment.
Technical characteristics
| Parameter | Specification |
|---|---|
| Filament | Thoriated-tungsten mesh |
| Filament voltage | 7.2 V (+5% / −10%) |
| Filament current | 180 A |
| Maximum surge current | 700 A |
| Cold resistance | 5 mΩ |
| Amplification factor | Approximately 25 |
| Grid to filament | 60 pF |
| Grid to anode | 25 pF |
| Operating position | Vertical, anode up or down |
| Net weight | 9.0 kg |
| Dimensions | See outline drawing in the datasheet |
Ratings and cooling
| Parameter | Specification |
|---|---|
| Maximum frequency | 120 MHz |
| Maximum anode voltage | 13 kV (up to 30 MHz) |
| Anode cooling | Forced air |
| Maximum inlet air temperature | 45°C |
| Maximum tube envelope temperature | 220°C |
Maximum ratings are limits, not a single operating condition. Voltage limits depend on frequency. Refer to the complete datasheet and consult our technical team before selecting operating conditions. Required airflow and pressure depend on the cooling curves and application.
Typical operation
Class C RF oscillator for industrial applications. These are two CW operating examples from the datasheet, rather than maximum ratings.
| Parameter | Example 1 | Example 2 |
|---|---|---|
| Frequency | 30 MHz | 30 MHz |
| Anode voltage | 12 kV | 10 kV |
| Anode current | 5.0 A | 6.0 A |
| Anode output power | 45 kW | 45 kW |
Choosing your replacement triode
What information should I send?
Include the existing tube model, a clear photograph of its label, the generator manufacturer, operating frequency, power requirements, cooling arrangement and quantity.
Can I choose a replacement by power alone?
Power alone is not sufficient. Electrical ratings, operating mode, mechanical dimensions, mounting, cooling and the generator circuit must be considered together. Contact us with the equipment details.
Where can I find dimensions and cooling information?
Open the PDF datasheet for the selected model to view its outline drawing and cooling curves. We can help you compare these with the requirements of your equipment.
What about pulsed operation?
Send the pulse duration, repetition rate, duty cycle and intended operating conditions. The suitability of a tube must be confirmed for those conditions.
Discuss your ITL15-2 requirements.
Send us your equipment details, required quantity and technical requirements. Our team can help you select the appropriate component.
Cambridgeshire CB6 3TX
United KingdomRequest a quote ↗
Request information
Complete the form below to enquire about our products and services.